Input modes¶

Defined in tapsdk.inputmodes. Prefer importing the concrete classes from tapsdk.

Base: `InputMode`¶

Attribute / method	Description
`COMMAND_PREFIX`	`bytearray([0x3, 0xc, 0x0])`
`get_command()`	Full GATT write payload: prefix + mode `code`
`name`	Human-readable label

Normal Tap operation for the OS. Mode code 0x00. SDK tap events are not produced.

Controller-only. Mode code 0x01. Device sends tap / mouse / gesture events to the SDK.

Combined Text + Controller. Mode code 0x05.

InputModeRaw(
    scaled=False,
    finger_accl_sens=None,
    imu_gyro_sens=None,
    imu_accl_sens=None,
)

Parameter	Default	Description
`scaled`	`False`	If `True`, raw payloads are multiplied by sensitivity scale factors (mg / mdps)
`finger_accl_sens`	`FingerAcclSensitivity.G2`	Finger accelerometer range
`imu_gyro_sens`	`ImuGyroSensitivity.DPS125`	IMU gyro range
`imu_accl_sens`	`ImuAcclSensitivity.G2`	IMU accelerometer range

Mode code: 0x0a followed by the three sensitivity enum values.

Internal helper used by InputModeRaw.

Method	Returns
`tolist()`	`[finger, gyro, imu_accl]` integer values for the command
`get_scale_factors()`	`[finger_mg_per_lsb, gyro_mdps_per_lsb, imu_mg_per_lsb]`

Builds the Spatial Control write: bytearray([0x3, 0xd, 0x0, input_type.value]). Used by TapSDK.set_input_type.